BIORESONANCE TECH • EQUIPMENT COMPARISON RECORD
How Bioresonance Tech Compares the Metatron Hunter 4025 NLS Verified with Original Oberon Equipment
NLS Verified is Bioresonance Tech’s designation for the specific green-face Metatron Hunter 4025 configuration selected after repeated comparison with original Nesterov-lineage Oberon equipment retained by Bioresonance Tech.
The comparison is deliberately narrow. It looks at whether the selected Hunter configuration reproduces the reference signal output consistently when the principal comparison conditions remain unchanged.
Important context: the finding on this page concerns the selected technical signal output under the stated comparison conditions. It does not establish that the Hunter 4025 and Oberon are identical products, or that every component, function, software output or operating characteristic is the same.
Why Bioresonance Tech Began Comparing Hunter 4025 Units
Bioresonance Tech acquired its first MK1 Biolas-Oberon more than 16 years ago. A later Metatron Oberon was subsequently added as the earlier platform became limited to older software. Together, the retained units provide a long-established reference environment familiar to the business.
Around 2023–24, as more lower-cost Hunter 4025 configurations became available, Bioresonance Tech began comparing candidate units with its original Oberon equipment rather than selecting by model name or casing alone.
The green-face configuration now supplied as Metatron Hunter 4025 NLS Verified was selected because its chosen signal output remained consistent across repeated runs and corresponded with the Oberon reference output under the recorded setup.
The Original Oberon Reference Equipment
Bioresonance Tech uses two retained Nesterov-lineage Oberon systems as its technical reference: an earlier MK1 Biolas-Oberon hardware unit and a later Metatron Oberon.
Reference equipment
| Earlier reference | MK1 Biolas-Oberon hardware unit, Nesterov lineage |
|---|---|
| Later reference | Metatron Oberon, Nesterov lineage |
| Experience | More than 16 years within Bioresonance Tech |
| Reference role | Comparison of the selected technical signal output |
How the Comparison Is Carried Out
Bioresonance Tech records the equipment and software environment, retains the same comparison subject matter, keeps the principal setup unchanged and then repeats the comparison rather than relying on a single run.
1. Record the setup
The reference equipment, candidate Hunter configuration, Metapathia GR environment and computer configuration are identified.
2. Keep the core variables unchanged
The same comparison subject matter is retained and the principal operating setup is intentionally left unchanged.
3. Repeat the run
The comparison is repeated so that an observation from one run can be checked against subsequent runs.
4. Compare the signal output
The selected Hunter signal output is compared with the corresponding output from the Oberon reference equipment and any material difference is recorded.
The 31-Run Hunter 4025 and Oberon Comparison Record
One retained comparison record provides a concrete example of the basis for the NLS Verified designation. The principal conditions and recorded observation are summarised below.
Green-face Hunter 4025 NLS Verified: 31 repeated runs
| Reference | MK1 Biolas-Oberon hardware unit and Metatron Oberon, Nesterov lineage |
|---|---|
| Candidate | Green-face Metatron Hunter 4025 NLS Verified configuration |
| Software | Metapathia GR |
| Computer | Intel i7-powered PC |
| Repeated runs | 31 |
| Comparison condition | Identical comparison subject matter with the principal setup intentionally left unchanged |
| Recorded observation | The selected signal output from the green-face Hunter configuration consistently corresponded with the Oberon reference signal output across the repeated runs |
| Material difference recorded | No material difference in the selected signal output was identified by Bioresonance Tech within this 31-run comparison |
Recorded finding
Across 31 repeated runs using identical comparison subject matter, Bioresonance Tech recorded consistent correspondence between the selected signal output from the green-face Metatron Hunter 4025 NLS Verified and the signal output from its original Oberon reference equipment.
No material difference in that selected signal output was identified within the scope of the recorded comparison.
Scope: this finding applies to the selected signal output and the stated comparison conditions only. It should not be expanded into a broader claim that every aspect of the two platforms is the same.
What Earlier Hunter 4025 Comparisons Showed
The green-face configuration was not selected simply because it carried the Hunter 4025 name. Earlier candidate units were also reviewed against the retained Oberon reference equipment.
Example: repeated-run inconsistency
During earlier candidate reviews, Bioresonance Tech repeated the same comparison without intentionally changing the subject matter or principal setup. With some candidate units, two successive runs produced noticeably different signal outputs.
That lack of repeatability was a practical reason those particular configurations were not selected for the NLS Verified range.
What made the selected green-face configuration different
In repeated comparison, the selected green-face configuration produced a signal output that consistently corresponded with the Oberon reference output. It could also operate within the Metapathia GR environment used for the recorded comparison.
The earlier observations relate only to the particular candidate units Bioresonance Tech reviewed. They are not presented as a claim about every Hunter 4025 unit or every other supplier.
What “Metatron Hunter 4025 NLS Verified” Means
NLS Verified is a Bioresonance Tech product designation.
It identifies the particular green-face Hunter 4025 configuration selected by Bioresonance Tech following repeated signal-output comparison with its original Oberon reference equipment. The designation distinguishes the configuration Bioresonance Tech has actually reviewed from other visually similar systems.
NLS Verified is not an Oberon certification. It does not represent approval, certification, licensing, affiliation or endorsement by the manufacturer of the Oberon reference equipment, and it should not be assumed to apply to products supplied by other sellers.
Comparison Limits and Commercial Interest
- Bioresonance Tech carried out the comparison work and sells the selected configuration.
- The 31-run record applies to the equipment, Metapathia GR environment, Intel i7-powered PC and comparison conditions described above.
- The recorded finding concerns the selected signal output only.
- The finding does not establish that every component, function, software output or operating characteristic is identical.
- The observations should not automatically be applied to every product using Hunter 4025, Metatron or similar naming.
- A material hardware, software or configuration change may require the comparison basis to be reviewed.
Commercial interest
Bioresonance Tech sells the Metatron Hunter 4025 NLS Verified and therefore has a commercial interest in the selected configuration. This is stated openly so readers can distinguish the company’s product-selection work from independent third-party research.
No manufacturer endorsement implied
The comparison was not commissioned, supervised, certified or approved by the manufacturer of the Oberon reference equipment. References to Oberon identify the equipment used as Bioresonance Tech’s technical reference.
Frequently Asked Questions About NLS Verified
What does NLS Verified mean?
NLS Verified is Bioresonance Tech’s designation for the specific green-face Hunter 4025 configuration selected after repeated signal-output comparison with original Oberon equipment retained by Bioresonance Tech.
How much experience does Bioresonance Tech have with its original Oberon equipment?
Bioresonance Tech has more than 16 years of practical equipment experience with the original Oberon platform retained within the business.
Which Oberon units are used as references?
The retained equipment includes an MK1 Biolas-Oberon hardware unit and a later Metatron Oberon, both from the Nesterov lineage.
How many runs are in the comparison record shown here?
The record summarised on this page contains 31 repeated runs using identical comparison subject matter while the principal setup was intentionally left unchanged.
What did Bioresonance Tech record across the 31 runs?
Bioresonance Tech recorded consistent correspondence between the selected signal output from the green-face Hunter configuration and the Oberon reference signal output. No material difference in that selected signal output was identified within the scope of the 31-run comparison.
Does this mean the Hunter 4025 and Oberon are identical?
No. The observation concerns a selected technical signal output under the stated comparison conditions. It does not mean every component, function, software output or operating characteristic is identical.
Is NLS Verified an official Oberon certification?
No. NLS Verified is a Bioresonance Tech product designation. It does not represent certification, approval, licensing or endorsement by the manufacturer of the Oberon reference equipment.
Are all Hunter 4025 systems NLS Verified?
No. Bioresonance Tech applies the designation to the configuration selected through its own comparison process. It should not be assumed to apply to systems supplied by other sellers.
Explore the Metatron Hunter 4025 NLS Verified
View the configurations currently supplied by Bioresonance Tech, including package contents, software options, setup assistance, introductory product training, support and current purchase terms.
Responsible entity: Bioresonance Tech
Comparison programme: began around 2023–24
Evidence basis: retained Bioresonance Tech equipment and signal-output comparison records, including the 31-run example summarised above
Page last reviewed:
Review approach: review following a material hardware, software or comparison-method change and as part of normal content governance.
Published by: Bioresonance Tech
This methodology forms part of Bioresonance Tech’s product-selection and quality-review process.
Last reviewed: 2026/08/08